Jump to content
Military Firearm Restoration Corner

Reamer Sharing Co-op


FC

Recommended Posts

The reamer sharing co-op is a group of us who combine our reamers and headspace gauges and make them available to others within the group.
To join the reamer sharing co-op you must send in a reamer or a set of headspace gauges or both and then you are a vested member and have access to all the reamers and gauges in the co-op.
Once you become a member you will be invited to join the Yahoo reamer sharing co-op group. This is where a lot of our communications takes place.
As a member of the co-op you can contact me and I will send you the reamer and or gauges that you need for you project. It will cost $18.00 to have a reamer and gauges shipped to you ($8.25 for shipping and insurance and balance goes into the sharpening fund)
If you are interested in joining, or if you have any questions please feel free to e-mail me for more information.

Rod Bobby
rkbobby@hotmal.com

Link to comment
Share on other sites

  • 6 months later...

updated 6 / 3 / 15

Inventory list

 

 


6MM Remington No-Go & Field Gauges
6.5 Rem. Mag Reamer
.240 weatherby Magnum Reamer and gauges
.257 Weatherby Magnum Reamer
.270 Weatherby Magnum Reamer
7MM Weatherby Magnum Reamer
.300 Weatheby Magnum Reamer
.340 Weatherby Magnum Reamer
8 mm Mauser Reamer
8mm Mauser Go, No-Go, Field Gauges

8 mm-06 Reamer

338-06 A-Square Reamer and gauges
35 Whelen Reamer

35 Whelen AI and gauges
257 Roberts Reamer
257 AI Reamer
260 Remington Reamer

.280 Rem. Reamer and Gauges
280 Ackley Imp Reamer
7mm Remington Mag Reamer
300 Win Mag Improved Reamer
308 Norma Reamer
358 Norma Mag Reamer

375 H&H Roughing and finish reamer
376 Steyr Reamer and Go/NoGo Gauges
.218 Bee Reamer
.22 Hornet Reamer
.22 LR Finish Reamer
.22-250 Rem. Reamer
.243 Win. Reamer, Go, No-Go Gauges
.257 Roberts Reamer
.257 Roberts/7x57 Go,Field Gauges
.270 Win. Reamer
.30-06 Finish Reamer
.30-06,.270 Win., .25-06 Go, No-Go Gauges
.300 Win. Mag Reamer
.308 Win. Reamer
.308 Win. Reamer
.35 Whelen Reamer
.416 Taylor Reamer
458 Lott Reamer
22-250 Gauges Go∧No - Go
22-250 Gauges- Go ∧ No - Go
22-250 go gauge
22-250 Reamer
25-06 Reamer
30-06 Reamer
30-06 - 270- 25/06 no-go Gauge
30-06-270-25/06 Go Gauge
6.5/06 Reamer
6.5x.257 Roberts Reamer
6.5x55 Swedish Reamer, Go, No-Go Gauges
7.62 X 54R Go & NoGo gauges
7.62x39 Reamer & Go/No-Go Gauges
7.62x54R No-Go Gauge
7X57 / 257 Roberts go-nogo-field gauges
7X57 Mauser Reamer
7mm-08 Reamer
7mm-08 Reamer
Belted Mag Go, No-Go, Field Gauges
30-40 Krag Reamer and go and no-go gauges
.300 win. short mag reamer , go and no -go
222 Rem go & no -go, and field gauges
45 acp Reamer
.357 mag Reamer
32/20 rifle Reamer
284 Win. Reamer and go and no go gauges
416 Rem mag Reamer
38-55 Reamer

38/45 Auto Reamer

Link to comment
Share on other sites

  • 8 months later...

I have 3 pull through reamers for headspacing Garands, M1A/M14s, and M1 Carbines. Calibers 30 Carbine, 308 Win, and 30-06 that I can loan out. The pull through rod makes it a bit of a pain to mail, since it has to be in a long skinny tube. I also have the Brownell's receiver wrench heads for the M1 Garand/M1A and M1 Carbine, as well as the barrel vise for an M1 Garand. I can loan those out, but they are the heaviest tools I have, so they will probably cost about $10 each to ship. I have the front sight removal/installation tool for the M1 Carbine also.

I have loaned out my D&T set before, on more that one occassion. Shipping/Mailing costs were under $10 if I remember correctly.

 

Tools availible:

Castle nut pliers for M1A

Front sight removal/installation tool for M1 Carbine

Bolt tool for Garand/M1A

Bolt tool for M1 Carbine

Bolt laping tool for Garand/M1A

Pull through reamer for:

30 Carbine

308 Win

30-06

Brownell's Receiver wrench for:

Garand/M1A

M1 Carbine

Barrel vise for Garand

Head space gauges for:

30 Carbine

308 Win

30-06

 

D&T jig for bolt action receivers

Bolt handle welding jig

Link to comment
Share on other sites

  • 2 years later...
  • 1 year later...
  • 9 months later...

I have a set of 35 Whelen head space gauges buried somewhere. I assume they are the same as 06. The gauges were included in a Shaw barrel kit for Savage/Stevens rifles. If any regular member of the board wants to barrow them, let me know. I did have a set of belted mag gauges, loaned them to a member of the Cast Bullet board and they disappeared along with the user name. I sent him a self addressed post paid envelope after his user name disappeared and it came back "attempted not known".

Link to comment
Share on other sites

  • 10 months later...
  • 5 months later...
  • 9 months later...
  • 1 year later...
  • FC unpinned this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...