So this has started out to be how cheap can I put a decent shooting gun together, Now I'm not counting the scope mount (would had to buy that for anything, same with the scope and rings) I guess back when I was messing with mausers I bought 2 of the short 6.5 x 55 carbine barrels and I still had one laying around. So a $100 93 action from sarco and I started. I bought a military stock from numrch for $45 and as stated I had the barrel. I have a cheat where I drill the bolt and use a 1/4 =20 bolt for the turn down handle, but a brand new bit wouldn't even scratch it so having the bending jig, (never having any success making a turn down bolt I figured I'd give it another go. Ended up getting a torch set that uses yellow MAP/ and red ox. I managed to get one done and it's almost really decent. 1 red bottle per bolt at 11 bucks a bottle. the stock was worked a bit and bedded. The barrel was a hair long (by 2 layers of maskiing tape) so I bought lapping compoud and put a bit between the action and barrel and worked it back and forth for 2-3 hours, chamber is now tight. Went to the range today and at 50 (max for the range) both the last 2 groups were under .5 with 2 touching and the other off a bit.