AzRednek Posted February 16, 2006 Report Share Posted February 16, 2006 Anybody know a trick to removing a stuck breech plug from a CVA cheapie inline muzzle loader. I ground a large screw driver blade to fit the slot but all I've done so-far is deforn the slot?? All my other in-line muzzle loaders had right hand thread, does anybody know if possibly the CVA is left hand?? It has a patched ball and no powder charge stuck in it. Even if I get the ball out by another means the plug now has to be replaced. It is soaking right now with PB blaster. I will gone for a few days, I'll respond when I return. THX Quote Link to comment Share on other sites More sharing options...
Toney Posted February 16, 2006 Report Share Posted February 16, 2006 They have right hand threads. Gonna have to soak and get mean with it Quote Link to comment Share on other sites More sharing options...
TwistJG26 Posted December 31, 2007 Report Share Posted December 31, 2007 This is probably too late. Had the same issue with my Knight. Had to use a vise and a socket set. The problem is that when you fire the rifle the grease on the breech plug oozes out. I strongly recommend using lots of gease and pulling the plug out and re-applying grease if the firing session is extended. Seriously, no more than 15 rounds without relubing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.