Guys, I have a Turk Kkale action that I bought used so I don't know the history. The action works smooth but when I try to lower the bolt into battery it will not go unless I force it. Can't diagnose the problem. Could some body help? powdr
'98 Turk Hard To Close Bolt
Posted 06 June 2016 - 02:00 PM
You might try taking out the firing pin and see how it works with just the bolt body
Posted 06 June 2016 - 02:32 PM
Yeah, I'd strip the bolt down to just the bolt and see if it is still hard to get into battery. If it is at that point, then something is too tight, like the lugs. If it closes smoothly with a stripped bolt, then start adding stuff back.
Some DyeChem on the bolt might show where it's rubbing, when you get a suspect area.
Posted 06 June 2016 - 08:40 PM
Another thing that may have been over looked is crud and cosmo either in the bolt or inside the receiver. Years ago I had a Czech 98/22 that the bolt would not completely close. I soaked the bolt and the receiver end of the barreled action in a bucket of gasoline overnight. I found a tiny piece of string floating in the top of the bucket of gas after I swirled the receiver around. Whether or not the piece of string was causing the problem or already inside the bucket I can only guess but the bolt closed perfectly afterward. Not knowing the history there's always the possibility the seller may have switched in bad for a good bolt assembly.
Posted 12 June 2016 - 06:35 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users