jiminthecorner Posted February 17, 2008 Report Share Posted February 17, 2008 HI I have a line on one of these k98 sniper safeties but will it fit on a 98 1908 Braz. ?? Is ther any "gunsmithing" involved? Anyone ever used one on a sporter?? I'm up in Canada so write loudly! Regards Jim Link to comment Share on other sites More sharing options...
tinkerfive Posted February 18, 2008 Report Share Posted February 18, 2008 HEY, IF THE 08 COCKING PIECE IS THE SAME LENGTH AS A K98 I THINK THAT YOU ARE IN BUSINESS, EA! I'VE BEEN MAKING MY OWN VERSION AND MAKE THEM SLIGHTLY LONGER TO WORK WITH THE LONGER COCKING PIECE ON THE 03 TURK. SO I'M THINKING THAT LENGTH / CLEARANCE TO THE COCKING PIECE IS THE ONLY ISSUE. I DON'T ACTUALLY HAVE ONE, I MADE MY COPIES FROM A PHOTO THEN FIGURED OUT WHAT THE DIMENSIONS SHOULD BE AND LENGTH TO CLEAR THE 03 Vs THE 98 WAS THE ONLY ISSUE I CAME UP WITH. AS TO FITTING , IT WOULD BE LIKE ANY OTHER SAFETY THAT CAMS THE COCKING PIECE BACK EVEN IF YOU WERE SWAPPING STOCK SAFETIES BETWEEN RIFLES . TINKER Ok I'm done shouting now, I hope you heard me way up there. Link to comment Share on other sites More sharing options...
jiminthecorner Posted February 18, 2008 Author Report Share Posted February 18, 2008 HEY, IF THE 08 COCKING PIECE IS THE SAME LENGTH AS A K98 I THINK THAT YOU ARE IN BUSINESS, EA! I'VE BEEN MAKING MY OWN VERSION AND MAKE THEM SLIGHTLY LONGER TO WORK WITH THE LONGER COCKING PIECE ON THE 03 TURK. SO I'M THINKING THAT LENGTH / CLEARANCE TO THE COCKING PIECE IS THE ONLY ISSUE. I DON'T ACTUALLY HAVE ONE, I MADE MY COPIES FROM A PHOTO THEN FIGURED OUT WHAT THE DIMENSIONS SHOULD BE AND LENGTH TO CLEAR THE 03 Vs THE 98 WAS THE ONLY ISSUE I CAME UP WITH. AS TO FITTING , IT WOULD BE LIKE ANY OTHER SAFETY THAT CAMS THE COCKING PIECE BACK EVEN IF YOU WERE SWAPPING STOCK SAFETIES BETWEEN RIFLES . TINKER Ok I'm done shouting now, I hope you heard me way up there. Hey tinker that was loud and clear!! I'll try it soon,hope it works. I think it looks a lot "cooler" than the chapman 2 position swing safety. Jim Link to comment Share on other sites More sharing options...
bubbamauser Posted February 19, 2008 Report Share Posted February 19, 2008 Tinker, Do you have a picture of yours? I Have used the ones stamped MK II on the back and the bold triggers with safties. I'd like to give making one myself a try. Thanks, Roy Link to comment Share on other sites More sharing options...
jiminthecorner Posted February 24, 2008 Author Report Share Posted February 24, 2008 Tinker, Do you have a picture of yours? I Have used the ones stamped MK II on the back and the bold triggers with safties. I'd like to give making one myself a try. Thanks, Roy SEnt pic. did you get it?? JITC Link to comment Share on other sites More sharing options...
bubbamauser Posted February 24, 2008 Report Share Posted February 24, 2008 Thanks Jim, I sent a reply. Roy Link to comment Share on other sites More sharing options...
Recommended Posts