Jump to content
Military Firearm Restoration Corner

Lachmiller Swage Dies


Recommended Posts

Went to an auction last weekend and scored a 3 die set of Lachmiller swage dies in 38, 44, and 45 cal.
Got a couple each partial boxes of 38 and 45 half jackets also. Also got most of a box of .30" lead wires about a foot long and a cutter.
Got a chance to try them out.
408919528.jpg
This is what the swage dies look like. This is the 45 die, but they all look the same except for the punch and the bore diameters.
The punch fits on the appropriate shell holder
408919709.jpg
408919522.jpg
This is the component and what they turn into.
Left side is the 45 and the right is 38.
Just cut the lead core to length, set in the half jacket and run in the swage. The half jacket goes in the top and the punch forms the nose. Whack the rod at the top to eject the finished bullet.
Makes 150gr 38’s and 200gr 45’s.
Lachmiller was bought out by RCBS a while ago. I found an ad for these dies from 1960. They only made these 3 sizes and cost $15 each. I got all three for not much more with the jackets.
I made a couple full jacketed 45's using annealed 40 S&W brass and a 40 cast bullet, but I need to refine my technique some for consistancy.

Link to comment
Share on other sites

That's cool. I would LOVE to swag 223 bullets from 22LR brass.

 

That's how one of the big bullet makers got started. Vernon Speer I believe it was. Being unable to get ammo during WW2 he started swaging 22 cal soft points using the RF brass.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...