preynspray Posted July 14, 2006 Report Share Posted July 14, 2006 Anybody have any ideas on what I can use to color gray epoxy black? Link to comment Share on other sites More sharing options...
gun nutty Posted July 14, 2006 Report Share Posted July 14, 2006 Black shoe/leather dye? Just a guess.... Link to comment Share on other sites More sharing options...
z1r Posted July 14, 2006 Report Share Posted July 14, 2006 Go to the bondo section and look for a littel tube of black dye. or, brownells sell small individual tubes of black dye. Worst case, maybe bone black or possibly even inletting black. Test the inletting black first though to be sure, there are many kinds and not all may be freindly to epoxy setting up. Link to comment Share on other sites More sharing options...
roscoedoh Posted July 14, 2006 Report Share Posted July 14, 2006 Steal some black ink out of your computer's printer cartridge. Link to comment Share on other sites More sharing options...
Guest Guest Posted July 15, 2006 Report Share Posted July 15, 2006 Email me for some black pigment. Link to comment Share on other sites More sharing options...
Guest Guest Posted July 15, 2006 Report Share Posted July 15, 2006 office@robertsoncomposites.com for the pigment Link to comment Share on other sites More sharing options...
tinkerfive Posted July 15, 2006 Report Share Posted July 15, 2006 I had some rust pits that I filled in with JB Weld. After shaping and sanding it looked kind of grey. I used a black perminant marker then a blue perminant marker. You have to look mighty hard to find the rust pits now. Link to comment Share on other sites More sharing options...
preynspray Posted July 17, 2006 Author Report Share Posted July 17, 2006 Thanks everyone for the replys and ideas and especially to roscoedoh who offered me some dye, What I did was mix some black printers ink into it [i am a printer] and it seems to work just fine... Link to comment Share on other sites More sharing options...
Recommended Posts