montea6b Posted February 10, 2009 Report Share Posted February 10, 2009 Let's say one were to decide to try to make a roughly half scale Springfield musket using a cast off Mauser barrel. What would be the best source of a side-plate/lock assembly? Are the pistol locks scaled down enough? The Philadelphia Derringer lock doesn't look like the right shape to pull off a close enough scaled down look. How tough would it be to reverse engineer the assembly on my Thompson Renegade and fabricate one from scratch? Anybody aware of a high quality die cast toy that could be used as a pattern? Are dimensioned drawings available? Quote Link to comment Share on other sites More sharing options...
ken98k Posted February 18, 2009 Report Share Posted February 18, 2009 Check out these miniatures- http://www.waynedriskillminiatures.com/ Quote Link to comment Share on other sites More sharing options...
montea6b Posted February 18, 2009 Author Report Share Posted February 18, 2009 That's what I'm talking about! I'd love to be able to create something like those. My thought in going with a muzzle loader is that it would be easier to scratchbuild a miniature lock and breech than it would be to machine an authentically scaled action. Another thought I've had is to use a Chipmunk .22 kids rifle as the basis for a Mauser or Springfield style small scale rifle. Not an exact scale model, but stylistically very similar, and shootable to boot. Quote Link to comment Share on other sites More sharing options...
ken98k Posted February 18, 2009 Report Share Posted February 18, 2009 That's what I'm talking about! I'd love to be able to create something like those. My thought in going with a muzzle loader is that it would be easier to scratchbuild a miniature lock and breech than it would be to machine an authentically scaled action. Another thought I've had is to use a Chipmonk .22 kids rifle as the basis for a Mauser or Springfield style small scale rifle. Not an exact scale model, but stylistically very similar, and shootable to boot. I've thought about the chipmonk as well. I twould be kool with a manlicher stock. Quote Link to comment Share on other sites More sharing options...
montea6b Posted February 18, 2009 Author Report Share Posted February 18, 2009 I've thought about the chipmunk as well. I twould be kool with a manlicher stock. I've seen one in a checkered manlicher stock, it looked really nice. That's another idea I had, was to just face lift a Chipmunk. Make it look like a shrunken custom Mauser, i.e. shadowline cheekpiece, ebony tip, skeleton grip cap and butt plate, etc. Would make a nice father son project... if only I didn't have 3 girls! I was thinking about the Springfield musket because I have a round cast off Mauser barrel to use. (I have plenty of tomato stakes already...) However, a Hawken style rifle would be fun to try. I'm scared of trying to grind/file in the barrel flats without a mill. Anybody ever done this by hand before? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.