Jump to content
Military Firearm Restoration Corner

Timney Trigger


trobi

Recommended Posts

i have started to temporialy assemble the 98/22 to see what if any problems that i might incur. i bought a timney sportsman trigger ,when installed the saftey will not engage. triger works great and did'nt have to do mods to the trigger guard. the inst. say to either build up at point 9 (cocking piece sear ) or some metal removed at point (10). being new to the configuration of a mauser bolt i don't want to start fileing on something i'm not sure of. would someone who has had this problem post a photo of what needs to be done to correct this problem. i believe point 10 is part of the cocking piece but then agian not sure.

thanks, kingsman

Link to comment
Share on other sites

Guest uncle fritz

I take it you are using the Timney without side safety, and using a conventional sear blocking safety.

 

It is common to have to bevel one of the surfaces, either the safety camming surface (preferred) or the cocking piece (carefully).

 

Good luck.

 

fritz

Link to comment
Share on other sites

×
×
  • Create New...