Jump to content
Military Firearm Restoration Corner

K98 Sniper Extended(low) Safety


jiminthecorner

Recommended Posts

HEY, IF THE 08 COCKING PIECE IS THE SAME LENGTH AS A K98 I THINK THAT YOU ARE IN BUSINESS, EA!

 

I'VE BEEN MAKING MY OWN VERSION AND MAKE THEM SLIGHTLY LONGER TO WORK WITH THE LONGER

COCKING PIECE ON THE 03 TURK. SO I'M THINKING THAT LENGTH / CLEARANCE TO THE COCKING PIECE

IS THE ONLY ISSUE. I DON'T ACTUALLY HAVE ONE, I MADE MY COPIES FROM A PHOTO THEN FIGURED OUT

WHAT THE DIMENSIONS SHOULD BE AND LENGTH TO CLEAR THE 03 Vs THE 98 WAS THE ONLY ISSUE I

CAME UP WITH.

 

AS TO FITTING , IT WOULD BE LIKE ANY OTHER SAFETY THAT CAMS THE COCKING PIECE BACK EVEN IF

YOU WERE SWAPPING STOCK SAFETIES BETWEEN RIFLES .

 

TINKER

 

Ok I'm done shouting now, I hope you heard me way up there.

Link to comment
Share on other sites

HEY, IF THE 08 COCKING PIECE IS THE SAME LENGTH AS A K98 I THINK THAT YOU ARE IN BUSINESS, EA!

 

I'VE BEEN MAKING MY OWN VERSION AND MAKE THEM SLIGHTLY LONGER TO WORK WITH THE LONGER

COCKING PIECE ON THE 03 TURK. SO I'M THINKING THAT LENGTH / CLEARANCE TO THE COCKING PIECE

IS THE ONLY ISSUE. I DON'T ACTUALLY HAVE ONE, I MADE MY COPIES FROM A PHOTO THEN FIGURED OUT

WHAT THE DIMENSIONS SHOULD BE AND LENGTH TO CLEAR THE 03 Vs THE 98 WAS THE ONLY ISSUE I

CAME UP WITH.

 

AS TO FITTING , IT WOULD BE LIKE ANY OTHER SAFETY THAT CAMS THE COCKING PIECE BACK EVEN IF

YOU WERE SWAPPING STOCK SAFETIES BETWEEN RIFLES .

 

TINKER

 

Ok I'm done shouting now, I hope you heard me way up there.

Hey tinker that was loud and clear!! I'll try it soon,hope it works. I think it looks a lot "cooler" than the chapman 2 position swing safety. Jim :unsure:

Link to comment
Share on other sites

×
×
  • Create New...