Jump to content
Military Firearm Restoration Corner

RVH/BPG

Members
  • Posts

    2
  • Joined

  • Last visited

RVH/BPG's Achievements

0

Reputation

  1. It ejects the rounds fine. Since I polished the chamber the bolt also closes Ok as well. The only issues is still the little sticking when I lift the bolt handle. I have to tap it slightly to get the bolt to slide back.
  2. Morning, First off I want to say Thanks for the add to this forum. I own a small 07 Gunsmithing business in GA. I hope to contribute as well as take some good knowledge from this group... I have an Argentine Mauser in my shop. I am have an issue with the bolt. When you lift the handle and try to pull it to the rear to eject the spent shell, It will lift but it will not pull back. The only way to get it to slide back its to lightly tap it with a nylon mallet. What could be causing this? I dug out my chamber polisher this morning. I will clean the chamber up and let you know what happens. If anyone has encountered this issue in the past. Please drop a line to let me know what you had and how you handled it. Thanks Randy
×
×
  • Create New...