FC Posted June 4, 2008 Report Share Posted June 4, 2008 The reamer sharing co-op is a group of us who combine our reamers and headspace gauges and make them available to others within the group.To join the reamer sharing co-op you must send in a reamer or a set of headspace gauges or both and then you are a vested member and have access to all the reamers and gauges in the co-op.Once you become a member you will be invited to join the Yahoo reamer sharing co-op group. This is where a lot of our communications takes place.As a member of the co-op you can contact me and I will send you the reamer and or gauges that you need for you project. It will cost $18.00 to have a reamer and gauges shipped to you ($8.25 for shipping and insurance and balance goes into the sharpening fund)If you are interested in joining, or if you have any questions please feel free to e-mail me for more information. Rod Bobbyrkbobby@hotmal.com Quote Link to comment Share on other sites More sharing options...
odies dad Posted December 6, 2008 Report Share Posted December 6, 2008 updated 6 / 3 / 15Inventory list 6MM Remington No-Go & Field Gauges6.5 Rem. Mag Reamer.240 weatherby Magnum Reamer and gauges.257 Weatherby Magnum Reamer.270 Weatherby Magnum Reamer7MM Weatherby Magnum Reamer.300 Weatheby Magnum Reamer.340 Weatherby Magnum Reamer8 mm Mauser Reamer8mm Mauser Go, No-Go, Field Gauges 8 mm-06 Reamer 338-06 A-Square Reamer and gauges35 Whelen Reamer 35 Whelen AI and gauges257 Roberts Reamer257 AI Reamer260 Remington Reamer .280 Rem. Reamer and Gauges280 Ackley Imp Reamer7mm Remington Mag Reamer300 Win Mag Improved Reamer308 Norma Reamer358 Norma Mag Reamer 375 H&H Roughing and finish reamer376 Steyr Reamer and Go/NoGo Gauges.218 Bee Reamer.22 Hornet Reamer.22 LR Finish Reamer.22-250 Rem. Reamer.243 Win. Reamer, Go, No-Go Gauges.257 Roberts Reamer.257 Roberts/7x57 Go,Field Gauges.270 Win. Reamer.30-06 Finish Reamer.30-06,.270 Win., .25-06 Go, No-Go Gauges.300 Win. Mag Reamer.308 Win. Reamer.308 Win. Reamer.35 Whelen Reamer.416 Taylor Reamer458 Lott Reamer22-250 Gauges Go∧No - Go22-250 Gauges- Go ∧ No - Go22-250 go gauge22-250 Reamer25-06 Reamer30-06 Reamer30-06 - 270- 25/06 no-go Gauge30-06-270-25/06 Go Gauge6.5/06 Reamer6.5x.257 Roberts Reamer6.5x55 Swedish Reamer, Go, No-Go Gauges7.62 X 54R Go & NoGo gauges7.62x39 Reamer & Go/No-Go Gauges7.62x54R No-Go Gauge7X57 / 257 Roberts go-nogo-field gauges7X57 Mauser Reamer7mm-08 Reamer7mm-08 ReamerBelted Mag Go, No-Go, Field Gauges30-40 Krag Reamer and go and no-go gauges.300 win. short mag reamer , go and no -go222 Rem go & no -go, and field gauges45 acp Reamer.357 mag Reamer32/20 rifle Reamer284 Win. Reamer and go and no go gauges416 Rem mag Reamer38-55 Reamer 38/45 Auto Reamer Quote Link to comment Share on other sites More sharing options...
Sailormilan2 Posted September 3, 2009 Report Share Posted September 3, 2009 I have 3 pull through reamers for headspacing Garands, M1A/M14s, and M1 Carbines. Calibers 30 Carbine, 308 Win, and 30-06 that I can loan out. The pull through rod makes it a bit of a pain to mail, since it has to be in a long skinny tube. I also have the Brownell's receiver wrench heads for the M1 Garand/M1A and M1 Carbine, as well as the barrel vise for an M1 Garand. I can loan those out, but they are the heaviest tools I have, so they will probably cost about $10 each to ship. I have the front sight removal/installation tool for the M1 Carbine also. I have loaned out my D&T set before, on more that one occassion. Shipping/Mailing costs were under $10 if I remember correctly. Tools availible: Castle nut pliers for M1A Front sight removal/installation tool for M1 Carbine Bolt tool for Garand/M1A Bolt tool for M1 Carbine Bolt laping tool for Garand/M1A Pull through reamer for: 30 Carbine 308 Win 30-06 Brownell's Receiver wrench for: Garand/M1A M1 Carbine Barrel vise for Garand Head space gauges for: 30 Carbine 308 Win 30-06 D&T jig for bolt action receivers Bolt handle welding jig Quote Link to comment Share on other sites More sharing options...
evergreensam Posted March 29, 2012 Report Share Posted March 29, 2012 I have a few items to donate if they are of use and when I finish current projects 348 win 45-90 303 Brit. headspace set(all 4) Quote Link to comment Share on other sites More sharing options...
MMG13 Posted February 8, 2014 Report Share Posted February 8, 2014 Rob could you suggest a caliber for me to buy so that I could join the co op ? Thanks Nate Quote Link to comment Share on other sites More sharing options...
Doble Troble Posted December 4, 2014 Report Share Posted December 4, 2014 Just tried to email Rob. Message bounced. Anyone have another address? Quote Link to comment Share on other sites More sharing options...
Sailormilan2 Posted December 6, 2014 Report Share Posted December 6, 2014 Rod, if you read this, send me a message. I tried to send you a message and as Doble Trouble said, it wouldn't go through. does anyone know if we have a .458WM reamer available in case I get the barrel I'm looking at. Quote Link to comment Share on other sites More sharing options...
AzRednek Posted December 7, 2014 Report Share Posted December 7, 2014 I have a set of 35 Whelen head space gauges buried somewhere. I assume they are the same as 06. The gauges were included in a Shaw barrel kit for Savage/Stevens rifles. If any regular member of the board wants to barrow them, let me know. I did have a set of belted mag gauges, loaned them to a member of the Cast Bullet board and they disappeared along with the user name. I sent him a self addressed post paid envelope after his user name disappeared and it came back "attempted not known". Quote Link to comment Share on other sites More sharing options...
RHA Posted October 14, 2015 Report Share Posted October 14, 2015 I have a couple of reamers I would donate. Posted on the Mauser Central thread, but no reply with instructions how to move forward. Is the Co-Op still functioning. Quote Link to comment Share on other sites More sharing options...
archer1214 Posted March 16, 2016 Report Share Posted March 16, 2016 Just so I understand....I cant submit a reamer to join unless I also donate a set of gauges? Quote Link to comment Share on other sites More sharing options...
ken98k Posted January 13, 2017 Report Share Posted January 13, 2017 Is there a 300 H&H reamer in the co-op? Quote Link to comment Share on other sites More sharing options...
rdm1962 Posted December 31, 2018 Report Share Posted December 31, 2018 Hey Tangelwood, I'll be needing a 8x57 finish reamer and gauges. I'll message you my address. Ralph Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.