Jump to content


Mauser Bolt Face Chart


  • Please log in to reply
10 replies to this topic

#1 Guest_elwskw_*

Guest_elwskw_*
  • Guests

Posted 06 January 2011 - 08:44 PM

Recently I picked up a couple of Santa Barbara 98 large bolt face complete actions. I'm wanting to build a magnum load but don't know what calibers I have to choose from. I'm new to this and need help!! Is there a chart or something somewhere I could use to get this info?

I'm also looking for information about the small actions, I'd like to build a 308, 243 or 30-06 but have heard that you have to use the small actions... Did Santa Barbara build a small action and how hard are they to find and what would the cost be, or is there another Mauser action I could use??

Thanks for the HELP!!

#2 Clemson

Clemson
  • Members
  • 637 posts
  • Gender:Male
  • Location:Upstate SC
  • Interests:Riflebuilding, Instructing in Gunsmithing School

Posted 06 January 2011 - 09:56 PM

There are a lot of potential candidates for your magnum Santa Barbara actions. This list is by no means exhaustive, but it is representative of cartridges that should work with a minimum of fuss:

.264 Win Mag
7mm Rem Mag
.300 Win Mag
.338 Win Mag
.458 Win Mag

The other cartridges you mentioned use a "standard" bolt face. Most do not require a "short" action. A standard length Mauser action can be made to work for any of them.

Clemson

#3 Sailormilan2

Sailormilan2
  • Members
  • 983 posts
  • Location:California
  • Interests:Rifle building, shooting, computors, airplanes

Posted 07 January 2011 - 11:03 AM

Another candidate would be the 375 Ruger.

#4 Clemson

Clemson
  • Members
  • 637 posts
  • Gender:Male
  • Location:Upstate SC
  • Interests:Riflebuilding, Instructing in Gunsmithing School

Posted 07 January 2011 - 03:29 PM

Another candidate would be the 375 Ruger.


Ha! I forgot about the 375 Ruger, and I even have that reamer! It is a real thumper!

Clemson

#5 Sailormilan2

Sailormilan2
  • Members
  • 983 posts
  • Location:California
  • Interests:Rifle building, shooting, computors, airplanes

Posted 07 January 2011 - 05:56 PM

Do you have headspace gauges too? I am giving serious consideration to changing my 376 Steyr to 375 Ruger.

#6 gun nutty

gun nutty
  • Members
  • 674 posts

Posted 07 January 2011 - 08:55 PM

257 Weatherby Magnum
270 Weatherby Magnum
7MM Weatherby Magnum
308 Norma Magnum
350 Remington Magnum (if you want a 35 Whelen equivalent)
358 Norma Magnum
416 Taylor
450 Marlin
458 American (458 X 2 Inch)

#7 Clemson

Clemson
  • Members
  • 637 posts
  • Gender:Male
  • Location:Upstate SC
  • Interests:Riflebuilding, Instructing in Gunsmithing School

Posted 07 January 2011 - 09:11 PM

Do you have headspace gauges too? I am giving serious consideration to changing my 376 Steyr to 375 Ruger.

Yessir!

#8 AzRednek

AzRednek
  • Members
  • 3,514 posts
  • Gender:Male
  • Location:Phx Az

Posted 08 January 2011 - 09:27 PM

Are you sure the bolt face is for a magnum? I bought two and my friend bought one apx 10 years ago from the same merchant in Texas. My two are marked mag but otherwise identical looking and same size as my friend's non magnum action. Beside the obvious "mag" stamping the only difference is the bolt face.

I still have one unmolested action in my vault. It has been begging for a 375 Rugar barrel. The one I did build I made into a 338 Win mag. My buddy never built his but traded it away to somebody that was going build either a 338/06 or 35 Whelen with it.

Chances are slim you will find more. From what I've read on the internet. Santa Barbra built the actions for a rifle maker but the deal fell through. Some of what I've read says the rifle maker the actions were built for was Parker Hale. SB dumped the actions on the US market I believe apx 20 years ago. The only way you might fins another is somebody like me having one tucked away somewhere.

If you have a question about what will fit the action and we can't answer it here. Call Chris at Shaw Rifle barrels. He is throughly familiar with the SB action. Chris is usually the person that answers the phone there and will help you even if you're not going to use one of their barrels or their services installing it.


Posted Image
The above picture is my in-the-white SB action next to a Parker Hale mfd rifle for JC Pennys using the SB action.
Below is a picture of my completed 338 Mag with the SB action.

Posted Image

#9 Guest_ewlskw_*

Guest_ewlskw_*
  • Guests

Posted 22 January 2011 - 09:44 PM

Azrednek, There is a dealer here in our area who came across quit a few of the SB Magnum actions. These are new and in the box and are selling for $250.00 each. They come with an adjustable trigger and have the base plate (I'm a newby, not sure what you call the magazine bottom cover).

I'm really looking for a Ruger M 77 action in Stainless that's a standard length action (for a 308 or 3006).

Yhanks for all the replies!!!

#10 Sailormilan2

Sailormilan2
  • Members
  • 983 posts
  • Location:California
  • Interests:Rifle building, shooting, computors, airplanes

Posted 23 January 2011 - 10:58 PM

Pray tell, where might this Mauser Mecca be?

#11 Kenpo Joe

Kenpo Joe
  • Members
  • 15 posts
  • Gender:Male
  • Location:The soon to be free state of California.
  • Interests:Hunting, shooting, reloading, gunsmithing, in that order

Posted 24 January 2011 - 03:24 PM

Azrednek, There is a dealer here in our area who came across quit a few of the SB Magnum actions. These are new and in the box and are selling for $250.00 each. They come with an adjustable trigger and have the base plate (I'm a newby, not sure what you call the magazine bottom cover).


Yes, tell us. I would travel to this Mecca just to get my hands on a couple.

Back on mute. B)




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users