Jump to content
Military Firearm Restoration Corner

brokengun

Members
  • Posts

    392
  • Joined

  • Last visited

Everything posted by brokengun

  1. I dont know FC; since a womans reproduction organs are on the inside it seems to me they have special powers. Or at least that's how i'm told it works.
  2. I have rebuilt several staters in my life time and still keep on the shelf, parts to rebuild MT10, MT30 and MT35 Delco starters. I had a similar probelm with an MT10 delco starter. The problm was a short on the Communtator. One contact on the communtator was shorted, while the rest were fine. When the starter would try to start from that one shorted communtator conctact the battery seemed to be dead. You could wait a little and allow the battery to rest the starter would then work. What happens is this; when you have a short in the comuntator on one contact, it still allows the starter to move slightly, even though it seems that the battery is dead. When you let the vehicle set and return and try again the starter may now work because the slight rotation from an earlier attempt allows the starter to get past the shorted contact on the communtator. A short in the communtator kills a battery fast and the voltage drain/loss causes your system to restart. While your battery is 2 years old, shorting it out like this will shorten battery life. You can test for a bad comuntator contact by using a ohm meter. My call is your starter is bad
  3. I seem to be missing a link or something. The page is blank
  4. My thoughts are if you can walk out the door with anything decent; I say go for it
  5. That is a mess and sounds like the laws that use to be on the books in Illinois concerning the transportation of a firearm across the state. [At one time we had a 100 different laws on the books at the county and city level concerning the transportation of a firearm]
  6. The root of the new bolt handle is completely wrong. There is a chance it will not be able to be made to work. The bolt looks like its set back about .050. Plus it looks like the original bolt root area was ground/cut to low to be repaired correctly or at least easily. I hope I'm wrong.
  7. If your going to a gun show start by asking a little more so you have room to work out a decent deal. From what I read and hear gun show prices are a premium for just about anything.
  8. Is there a chance they gave you grief over your European Heritage? I used to change tires for a living and had acquired the nickname truck tire. I know that time is money for a driver and setting is not money. I used to deal with drivers coming out of Chicago that always seemed to be lost, claiming they forgot their glasses at home or some such nonsense. I always helped them get back on the road by showing them a road map. Still this day I don't know how they got a drivers license without being able to read
  9. I have been receiving auto replies for some time and just thought it was a way to encourage use of the site. I may change it later but I'm not going to complain about. This site is a good one and worth keeping. I do wish we could see a few more builds or tricks of the trade but I figure most people are like me sick, broke or both. Thank you for your work and efforts in keeping this site up and going FC. Brokengun
  10. I have neighbors that are into Black powder but I have never got the bug. That said its interesting that Black Powder is affected by bullet sellection just like everything else. FC do you have an air compressor try blowing the patches out with air first. Maybe the ball will just roll out
  11. Thank You for your hard work on maintaining this site. The Bolsheviks hate freedom of the people and will do anything to stop it including attacking this site
  12. Yes it is a happy day; seem like the sun is a little brighter today too!
  13. From what I have read the threat against churches is real and not a fake story so load up and be safe.
  14. I like the idea, but how are you going to cut out the ole threads on the Turk. If you do it on a lathe and you get the receiver off then the barrel may be off center and the barrel is not straight.
  15. I'm sure the PC types will define everything has racism. Look at how media (Bolshevik Press) is reporting on the OU stabbings. They reported it has an active shooting event.
  16. I see Trumps victory as breathing room and nothing more. We must still keep active if we are going to turn this country around
  17. There is massive vote fraud being reported in PA. There are reports Voting machines will hardly even record a vote for Trump at some polling places. Youtube video's are being made of some of the problems. People are upset. The people getting cheated out of their vote for the most part are Americans that are of color.
  18. This is in fact "D" Day. What happens today decides whether or not we continue as a nation. VOTE TRUMP!
  19. Yes; Trump has no chance to win so all of you gun owners stay home so Hildabeast can steal your guns. Right... VOTE TRUMP!!!!! Take A friend and have them vote Trump
  20. I too agree. The host was trying to set -up Trump and he didn't bite.
  21. The Republican party is full of traitors. In Illinois 4 rino republicans have came out against Trump. 2 of them are Tea Party. All I know we are finding out who the Republican traitors are in this election. The so called potty tape was released by Rat Ryan. I hate to say this but I have heard more A$$ grabbing language in my High School locker room than what Trump said. I have even heard worse from members of my own family.
  22. $60 isnt bad for that trigger guard. I have seen standard trigger guards go over $30. Thanks for sharing
  23. There is one event that no one seems to remember about Obama that makes me still believe there are questions about his birth. When Obama was first elected to the US senate for Illinois he was taken on a trip to Russia with then Indiana Senator Dick Luger. When Obama got to Russia he was detained by the Russian security forces the FSB; because of a Pass port problem, and because the Russians believed that Obama was a spy for Great Britain. You see Obama had a British pass port "NOT" an American Pass port. If Obama was born in Kenya or part of the British Common Wealth he would have had a British pass port to travel. After Obama was president I heard a news broadcaster making a comment that Obama must be traveling on a diplomatic pass port because he did not have a US pass port. then the broadcaster started smiling/laughing. I am convinced that the establishment knows full well that Obama there are still questions about his birth. Minister Rick Wiles at Trunews.com time to time reminds people of the event I just described.
  24. Nice job. More important you got to help your son, that's priceless
×
×
  • Create New...