rebel49

Silly question, Trump naturally!! Biden is and idiot. 

I shoot it FC and carry, hopefully someone will come by and take it off your hands. I have more than enough loaded and about 10K + to reload.

Should of kept it as the 10mm and taught people how to shoot it. .40 S&W was just a joke.

Good one FC, it has a lot of meaning.

SNS bullets, the red coated ones. We've been shooting them for over a year now. I load at +P for the .45, no lead fouling. .357 Sig same bullet Mfc, running a 125gr @ 1375 fps, no leading.

Try them you can order direct or thru Dillons, I live about 25 miles from them and go and do a pickup.

I'm still around also, just don't post much anymore. Still doing gunsmithing at home for my clients and one local shop, keeps me busy.

First one you describe are V-22 Osprey.

All Thompsons fired from an open bolt, squeeze the trigger and the bolt ran forward picking up a cartridge along the way. As the round entered the chamber  almost all the way it would be fired by the fixed firing pin and start to extract and run the bolt back.  By letting off the trigger the bolt is caught and held back until the next time trigger is pulled.

The ATF decided that open bolt guns in semi-auto could be easily converted to run full auto by changing some parts or making new ones, So no more open bolt guns. 

Whatever. I stand ready to fully defend the Constitution and the Bill of Rights. With my life if necessary!

Years ago I had a .22 rifle that was really leaded. Tried everything you guys mentioned, no dice. So someone had told me to try Kroil, I plugged the breech and filled the barrel and let it sit for 3-4 days. Dumped the barrel and swabbed and out came strips of lead. Did the same thing several times, followed by brushing and more patches and finally got down to barrel metal.

The bore showed nice and shiny and you could still see machining marks with the borescope.

Hope everyone had a Happy Thanksgiving with family and friends. I know I ate my share.

Bergdahl should have gotten Life without parole for the deaths and the injuries he cause by being a blatant COWARD. Better yet we should have told the Stans to keep him, we don't want him back.

Good one Karl.

Headspace dimensions for .30-06 and .35 Whelen.

.30-06 from base of cartridge to headspace datum point = 2.0526"

.35 Whelen from base of cartridge to headspace datum point = 1.9892"

Info from SAAMI so the cases are not the same.

Good One FC! Perfect for Christmas.

And to all you guys on here MERRY CHRISTMAS and also a HAPPY NEW YEAR.

Good Point Doc! We all need to push the voters to vote on election day.

Colt Commander .45ACP with work done.,Steyr M9A1 9mm, steyr S9A1 9mm, or Steyr M357 357 Sig. or Keltec P-11 9mm

Not all at once mind you, but I trade off between guns often.

This broad should fall thru her Hole and break her F'in neck.!

Happy New Year all!

Probably work as well as "Gun Free Zones", NOT!!!!!!

That whole bunch in DC are a pack of stupid asses. I wish that someone would just flush the toilet!

This girl is a complete and utter twit!!!!

This is absolutely what is wrong with our country, people like this vote. And that is why we are in the state of affairs presently.

I'm really happy my children didn't go to college and learn this S%%T ! I would be really, really PO'd that I wasted tuition money, in fact I'm glad I spent it on firearms..

Karl

They told me after gall bladder surgery to walk as much as I could for the first 3 days after surgery to relieve to gas. It seemed to work, but the first two trips up the block were a real boogger, almost had to call for an evac on the first trip.

Neurosurgeon told me in 07 " Your fighting days are over! If you get into a physical confrontation you may end up a quad in a chair." so I said "then I'll just have to shoot'em then".

Ain't going to end up in a chair if I can help it. Just had to learn I wasn't 27 anymore.

Don't feel bad or alone AZ, I do the same chit around here every once in a while. Sometimes it looks like the 3 Stooges when the old lady and I are working on a DIY project.

And if you want to 3D print in metal (powdered metal and then sintered) the machine will run you about 2.5 million or so. Not something you can buy and stick in the basement or garage and hook up to the old PC and start banging out firearms. Just sayin.

Odies Dad

There are a LOT of A-holes in DC that need to find another job!

Kinda hard to figure where to start though.