Jump to content
Military Firearm Restoration Corner

rivitir

Members
  • Posts

    177
  • Joined

  • Last visited

Posts posted by rivitir

  1. I'm starting to get into reloading and I've been enjoying it. I've been enjoying it so much I bought a Lee load all from Midway. I've been researching shotshell reloading and I must admit I'm really lost due to all the choices! When I reloaded .357's I just did a little research and ended up picking a load with the help of a local gun shop owner.

     

    Unfortunately I have yet to figure out what brand or types of components I need so I thought I would ask you guys for some wisdom. I'm going to start reloading using 2 3/4" 7.5 skeet 12ga. shotshells.

     

    I figured I would use the same powder, Alliant's Unique type, since it says its good for 12ga. Would you suggest a different one for someone starting out?

    Any suggestions on what type of Wad, Case (can I use used cases?), Primer, etc I should use?

  2. Really depends on what and how much you're shooting, doesn't it? I mean, if you're shooting 22's, a 1/8" steel plate angled into some sand will do you fine. For 9mm, maybe 1/4" plate. For 30-06, you're going to need something serious.

     

    I have a pellet trap I use in the house with a pellet rifle. I had to add a piece of steel plate to the back, because my chinese clone of a german air rifle was banging up the trap pretty good. It will fragment the pellets, but catches most of it and I sweep up the rest that escapes when I'm done. I have a range bag I bring down to the kitchen with my spotting scope, targets, elbow pads, sling, etc.

     

    I would think it would also depend heavily on what type of projectile your shooting. for example a soft point 30-06 isn't going to penetrate like a steel core or armor piercing round.

     

    On a side note, the fact that you have a range bag for your kitchen I think is hilarious. If I did that I think my wife would divorce me.

  3. www.rubbercal.com

    Rubber, when thick enough, makes an excellent target holder and something to slow or stop bullets. You can staple to it. I like rubber sheets with fabric interlaced, like tires. This company recommends C.I. Sheet and Skirtboard.

     

    At the club I'm a member at we used to use thick rubber sheets with a dirt hill backing in order to trap bullets. It worked very effectively. However the metal piping we used to hold the rubber sheets up (they are very heavy) caused much concern from our neighbors because shooters were hitting them instead of the targets. We ended up pulling the metal pipes and cables and removed the rubber sheets. Now you have to bring your own target stand with you to the range.

     

    Thanks for sharing the video. I always wondered how bullet traps worked.

  4. Spoke to the wife about it. She doesn't like the idea of getting another gun period, no matter what type/kind. So for now I just keep her .22LR loaded and I'll keep my long tom 12ga handy. She is a really good shot with her .22LR at the range but not to sure how well she would do when things are crazy. I guess if we ever do have a problem, and I'm not around, we'll see what happens. At least a .22LR is better than nothing.

     

    I may talk her into getting a 20ga down the road or so... we'll see. I know she will want one once I take her skeet shooting. :D

  5. I have several friends and a couple relatives that are cops. All of them that I have spoke to about "bad guys" having access to guns say they mainly get them through theft and sometimes from having someone legal purchase them. So I doubt anyone would take the time to modify a toy gun in order to make it into a real gun. But their are some crazies out there.

     

    I think this is like most other FUD in the world. Get people scared and read the articles they print.

  6. Thank you for all the feed back. You've given me much to think about.

     

    I really liked the idea of the 20ga. It's cheap since I can pick one up for less than $200, ammo is inexpensive and easy to acquire, and I'm sure my wife would feel comfortable shooting it. I've also been talking to her about trying trap/skeet shooting so she could use the shotgun for that as well.

  7. I personally have lived my entire life in Indiana and never once had a problem with them. I would hear them howl in the distance but thats about it. That has now changed. I just moved into a new place near some woods and have been noticing that local cats are disappearing and I have yet to see a rabbit. I've been seeing them very near my home and have been hearing them howling every night multiple times. I'm pretty sure they have a den in the woods just across a small field from my home. And based on the howls I'm guessing its a large pack.

     

    So basically I want to help out with Coyote population control should the need arise and they get to close to my home while my family or dog is outside.

     

    I need something quick and easy to grab, has good stopping power, can shoot multiple shots quickly, and small enough my wife would be comfortable shooting it. I'm thinking a 30-30 lever would be good but I would like to know what cal or type of gun would you suggest?

     

    And yes 8uck, I wish I kept my .357 lever... would be very handy now.

     

    Thanks for the feedback.

  8. Welcome to the group!

     

    If it was me I would probably go with the 6.5x55 just because its one of those rounds that have been around for a very long time and its a very good shooting round. I didn't even think about it but Pacrat is right, watch those pressures when comparing cartridges.

  9. nice start. that barrel shure looks long with that ati stock.

    is mosin spelled wrong on the inside of your stock? on mine its spelled moisin :blink:

     

    I really like how long the barrel is. Looks cool! It's long enough you should be able to hit a 100yrd target point blank. :-)

  10. word from the firefighters is that in a fire, if a safe is hosed, everything inside rusts in seconds due to the steam...

     

    i was planning to sheetrock it to help.

     

    Would putting in some dehumidifiers help? I know they have them for safes.

×
×
  • Create New...