sonic1

a link for the 35 gremlin....

http://www.bfgcartridges.com/

found this on gb http://www.gunbroker.com/Auction/ViewItem.aspx?Item=163749302

a work of art

i have a 45/90 reamer if you need it.......and yes you can use smokeless powder and filler..in a 45/90 load

i think some reduction would be ok

i"ve sprayed several ak"s with duracoat ...used this sprayer from fleabay 330417026024.....hvlp mini sprayer ...did a great job...for the price...be sure to keep air pressure down..

came out in tonight paper

http://www.duncanbanner.com/local/local_story_070003905.html

a 450 marlin would be easier..... if easy is the right word

really like that bird and basket weave...you need to try some rust bluing it"s not that hard...

good luck

if i have it right google and yahoo search this sight for key words ..to make there search engines faster

.357 mag http://www.gunbroker.com/Auction/ViewItem.aspx?Item=154022492

thomas seidel who is running this link you added is a real snake.was in buisnes about 2 years ago..scammed a lot of people out of money and them dropped out of sight..now he has a new site backup..his phone is a cell and his address is a mail drop..most people who sent money never got there parts me being one of them.

you need to do some reading on how to get the barrel off..your going to need some tools...

can"t say i"ve seen one ...most bolts are put in a lathe and cut with a lathe bit to open them up..

sometimes hard to hold because of the bolt shape..mausers chuckup better with the bolt handle removed first..

also can be cut with an end mill,if you have access to one

about the reamers and gauges...this is just a short explain and not meant to be the total answer..the round needs to fit the chamber with out being to tight OR to loose..this is what the gauges are for.. to get there they need to be cut to certain depth..this what the reamers are for...if it to loose you need to cut the threaded end down ..and recut the chamber..you will see barrels sold as being short chambered ...this is sold so all you need is a reamer an gauge to install..

 

this link for gauge info...http://www.surplusrifle.com/shooting/headspace/index.asp

 

yours is a series 2 try this link for barrel

 

http://www.midwayusa.com/viewProduct/?productNumber=468773

 

http://www.hoosiergunworks.com/catalog/mauser_reference.html

about the reamers and gauges...this is just a short explain and not meant to be the total answer..the round needs to fit the chamber with out being to tight OR to loose..this is what the gauges are for.. to get there they need to be cut to certain depth..this what the reamers are for...if it to loose you need to cut the threaded end down ..and recut the chamber..you will see barrels sold as being short chambered ...this is sold so all you need is a reamer an gauge to install.

http://www.sporterexpress.com/High-Value-Mauser-98-Rifle-Barrel-6.5-x-55-Swedish?manufacturers_id

does your turk have k kale on the crest..this should be a small ring barrel thread..what state are you in ? do you have a c and r ffl..

did it leak much gas ...bolt looks to have some burn marks

$25.00 shipping ..

i was told you need at least a .338 ultramag to kill a deer..and here you go and use a 7.62x39

the pig problem here in southern oklahoma is out of control..herds of 40-50 are being seen..were taking as many as we can..pic of young lady is my friend niece..

glad to see that .44 mag got a deer

i pulled 2 m44 ...i thought the barrels must have been welded on.. they were so tight..

any updates i"m wanting to try the same stuff