littlecanoe

Great info Spiris!

Tell me more about your seating set up. I have old, I believe CH 38/357 dies. Could they be made to load the longer brass? I'd have to be talked through that process. Are you having to trim brass since it's a straight wall?

I took it to the range and shot about 24 sub max handloads in 357 magnum. That rounded grip made it roll right up in my hand. I'm surprised at how much bite the recoil had with the 158 gr XTP's. I plan on ordering brass and 180gr XTP's soon. I believe that the 10.5" barrel is really gonna make this gun rock. I definitely plan on a Hoague grip to control the beast.

What powder and bullet are you shooting?

Right now I plan on leaving it open sights. I can see the bifocals in the near future but so far can keep the irons focused.

That is pretty but I can to a lot with 850 $

I was looking at Midways site last night and saw the Hogue grips. The reviews were very good for improved grip, sight line and accuracy.

I'll check out the bianci and galco. Wish that I could find them locally.

Will put up a pic or 2 when able.

I've researched a bit more and found that there were issues with the strap eroding. The erosion appears to come from the hot rodding of light bullets to push greater than 2k fps. Seems that the pistol was built for heavier bullets in the 180gr range with more moderate velocities.

 

I'll check the strap on Monday if it's still there.

Well, I got the thing. Traded a Taurus 608 357 Mag for it. I had to step up the boot but that's OK with me. Now I can shoot the Magnum and then the Maximums when I get set up to reload.

I decided to get it after watching one on Gunbroker be bid to 500 and fall short of the reserve. It's back up now with a 600 bid on it.

Part of what made my decision was the quality of this old Ruger, 1983 build, to the Taurus which is 3 yo. I'm starting to want fewer quality weapons instead of a bunch of less expensive ones; and be able to shoot what I have with skill.

Any recommendations on a good leather shoulder rig to carry this hoss. It has a 10.5" barrel

I tend to get mule lipped and scared too. I just keep thinking that in 2 years, the tide may turn back if the fella messes up badly enough. The only problem with that thought is the Republicans don't seem to be Conservative any more. Thanks Mr. Bush and Mr. Bush. We need another Ronald Reagan.

I've researched a bit more and found that there were issues with the strap eroding. The erosion appears to come from the hot rodding of light bullets to push greater than 2k fps. Seems that the pistol was built for heavier bullets in the 180gr range with more moderate velocities.

I'll check the strap on Monday if it's still there.

Sorry, fella's. Posted in the wrong section.

I was in a local gun/pawn shop today and they have a 347 Maximum Ruger Black Hawk for sale. I didn't get to examine the cylinder strap but will do so. If I recall, the asking price is 399$

Is this one that I can buy and turn over for a small gain? I've researched a bit and it seems that this action is nice for building on. I really don't know much about the caliber. Any ideas?

Great rifle. I hope that you get to break it in right this weekend.

Excellent Karl!

I await a rebuttal........................................................................

..

HF, That's kinda what I was thinking on the Mulberry. I like the berries though! Yum

Do you ever run across Pecan that would be good for a stock? I'd really be interested in a good blank or two.

Mulberry isn't a hardwood.I've cut lots of it,and it just aint hardwood.It's very white,like beach or birch.I always figured on trying some in the smoker,but never for a gunstock.

I believe that mulberry has some characteristic that are similar to Hedge Apple aka Osage Orange. Hedge Apple is good for bow wood and many traditional bow makers use it. I believe that Mulberry has much of the same characteristics.

I can't remember but aren't the rings pretty thick Horsefly? Not sure if it would be stable enough for a stock because of the expansion and contraction it might go through. Around here, mulberry trees don't live long so they never achieve the trunk mass for tight growth rings.

Thanks for sharing that FC. It's amazing to realize just how much the young ones see.

Does this sway you in your decision?

Well guys. Before I left for work this morning I called and became a life member of the NRA on their payment program. It's time to get serious about the one right that protects all others.

Is there another organization that you would suggest we consider?

I wish that Keyes could become a mainstream candidate. I'd vote for him in a blink of the eye. Great conservative.

I did my part in keeping KY and hopefully the country in the Red. NoBamaMama!!

I've never had one kick back that hard.

Maybe Momma swung it at him!! LOL

Not one of my relatives..............but I know a few good old boys like him.

I'm still trying to figure out how he got his teeth knocked out by a chainsaw!

I'm preaching "VOTE" to those who will listen.

I'm not sure how to take some news on Limbaugh today, but there seems to be strong suggestion to evidence that there is a large movement abroad in the Obama factory to make the polls, boards, blogs, appear to be heavily swayed in the Obama favor. If that is truly the case, and I hope it is, this election could be a surprise. It will be interesting to see how it turns out. I still can't believe that most of the country wants socialism and there have to be a lot of very angry democrats out there!

jac68984,

Welcome.

I'm not a mauser expert as I don't collect "collectables" but look for something to sporterize.

I'm sure that some of the guys can tell you more about what you have. I'd first check all the stamped numbers on the metal

parts. See if they match. That will assign value and is a good place to start the assessment. The value is obviously decreased

by the stock being cut.

Thanks DT. That's kinda a Jack Nicholson Photo.

Clemson, Good response. I can't and won't argue against your experience. Do you know how many of those that you have taught are "new" to guns in the sense that they don't live with gun owning spouses or fathers? That's my main point. The shrinking base means that they, the NRA, are missing opportunities. The base needs to be increased. Like FC said. Same message (tactics) for 30+ years.

Now, don't get me wrong. I'm for what they are for. No if's and's or but's. They are fighting on a front that requires engagement. There just needs to be some effort to reinforce the ranks. As the main lobbying group for gun advocacy that mantle falls to them by default.

However, you guys have made some great points that I'll think over for the next few days. I'll probably rejoin.

Clemson, I went back and re-read your post. The statement that you responded to isn't meant to bring their present programs into question. It was a question concerning a broader focus. I should have been more clear on that.

Well, I just hung up after a conversation with an NRA phone rep. I didn't rejoin and haven't been a member for about 2-3 years.

Some of you guys may feel the same way but here's what I told him kinda paraphrased:

-I'm tired of politics as usual. The NRA keeps fighting the same battle over and over with a shrinking Gunowner class to support them.

-The NRA has done little or nothing to increase the ranks of gun owners by educational campaigns that address the responsibility of the citizen to be able to defend his country.

-The NRA has chosen to fight a battle at a political level rather than a grass roots uprising that engulfs so much of the masses that the liberal politicians wouldn't even dare suggest taking our arms away.

-The NRA has chosen to use the same tactics that Libs use. Scare the pee out of the people that support you so that they will give you more money.

I'm tired and maybe a bit cynical but this is where I see the NRA. 40 years and no change.

Am I wrong or should I support them anyway?

Welcome back Dave! Glad all went well. I'd not be surprised if that spur didn't cause most of your problem.

Keep us posted on your recovery.

lc

WOW! That's kinda weird.

Bob58,

When I lived in GA we used to drive up to the mountains of NC quite a bit. We'd go across north GA and by Brasstown Bald and Black mountain and work our way up to the Highlands and Cashiers area. My wife and I honeymooned in that area. Franklin, Ashville, beautiful country. I love the smell of the Hemlock forests. Very sad to see that devistation.

You're right on with the Stewardship.

Dave,

I'm sorry to hear that. Hope that all goes well with your surgery.

As a physical therapist my suggestion would be to talk to others that have gone through this. Find a good therapist for your rehab.

Many PT's and PT assistants are ham fisted. Find one that can help restore your range of motion without killing you.

After surgery, you're likely to be in some type of sling. You're gonna find yourself tightening up, elevating the shoulder and pulling it forward. Try to catch yourself and stop this if possible. If the sling is adjusted properly it should cradle your arm in a relaxed position. It's human nature to tighten up and hold that arm and shoulder still in a protective response. The problem is, muscle which supports the shoulder and muscle at the base of the neck will become very tight and sore, adding to your pain level.

This will also help you when you start your therapy. You've already started to learn to relax. Then, if you have a good therapist who knows how to handle you and keep you relaxed your sessions will go easier. If you can relax into the movement that the therapist is helping you achieve you'll gain pretty quickly. You may have to close your eyes and get inside your head to do so. By working with the therapist you'll rebound very quickly.

If you have any questions about rehab I'll try to help if I can.

lc

I believe that the are called "Grinners" too. That 1st pic really shows that off.

A friend tells a very funny story about killing one. Not long after he and his wife were married he had to borrow a car from his new F-I-L. It just happened to be a fairly new Cadillac. Their garbage can was being robbed at night so he was determined to stop the messing. Late one evening he hears a noise, peeks out the front door and sees a grinner on the garbage can. He got his wife to hand him the shotgun, eased it through the front door and BAM! Problem solved and trash can robber dispatched.

The next morning when he got up to go to work, he noticed some greasy stuff splattered down the side of the Cadillac. OH! Memory light came on above his head. He had splattered Mr. Grinner down the side of his FIL's Caddy! I guess the grinner got the last laugh so to speak. It seems that the greasy fat from a possum is hard to get off the paint on a new Cadillac.