cold shot

Thanks Clemson for the help. I need to clean and inspect the bore first,then find a smithy out here or some one close

so I would'nt have to send it to timbuktoo...Dave

Sorry to here that Brenden, Prayers from here too...Dave

I have a sarco stamped 8mm barrel. It has a cut out for the extractor. Can the cut out prtion be milled off so the chamber face is flat. I wanna put it on a vz24 action

Anybody know how hot an oven gets on the self cleaning cycle? Hot enough to fire a clay piece?

My daughter had a pottery class at h.s. Don't quote me but I think it's around 1800 to 2500 degs.

I 'll ask my daughter, and get back to ya. ..Dave

hey Guy. I could usaer it for my mag rifle. PM me ..Dave

let's see...that would come to just over .66 cents. / lb. I just checked with mudway. Linotype is going for around

$28/7lbs= $4 /lb.. Tinker if you can carry them home ...Grab them. ..Dave

Hey sm2, good looking rifle, the range report looks good too...Dave

For ALL you "smoker wanna be's" the best stuff to inject into the exhaust just behind the cats is Dextron 111. Or use any TRANS fluid . The smoke is blinding white and they can't see for shitttes,not only that, it smells the same. Anyone ever stuff the spud in the tail pipe? Next time put a 3/4 " hole in the spud first. Relives the back pressure. When the tater is cooked it swellup then about 5 min later...Kapow..the"ll swear they blew something up....Just me yakkin...Dave

I'm using a RCBS 2 at the present time. Was planning on getting a newer model or brand..I like the Q.D. design of the lock and load style. After counting up the QD rings I'd need, I think I'll stick with what I got. I did however get the Lee's 7mm/130gr cast mold w/handle. I was having problems with the bullets having lines in them. Do aluminum molds need to be seasoned..After about 250rds then most of the lines came out.

I think for having nicer looking rds,the Lyman molds are a lot better. I'm just shooting paper at 50-100yds so the Lee mold will do. Today I just got through castin 600rd of the 7mm/130grs and 130rds of

Lyman's 31141 mold of 30-30/173gr casts. Now to just sit back and prep them for loading. Thanks for all the input. Dave

Hey folks. Just wondering if any of you use either Hornaday's lock & load or Lee's challenger presses. Was thinkng about upgrading..If so how do they rate. I know that Lee is alot cheaper, never seen them or used them..Any insite would be greatfull...Dave

Hey mr horsefly, I read this to my 2 girls, they were laughing, and then the wife just said "COOOL". Bet ya she was laughing on the inside. Congrats on the 35 years. Our 33rd is june 6th.Takes alotta love,committment and understanding to make it work that long..Don't know about you but I married my "best" friend....congrats again and wish her a happy mothers day...Dave

That is awesome Brenden..Glad all is finally goin your way for once...Just keep on keepin on. dude..

Will wish for more good lucky to come your way my friend....Dave

Yo tanglewood, pm sent Pending the funds it's yours.

Ah Ha, I got the first jump...Happy Birthday Mr. Usmc 0332...Hope ya have many more...Dave

Eddie Arnold was one of the greats, in the company of the likes such as ,Hank Sr., Buddy Holly,Chet Atkins.Waylon,Charlie D.etc. will hate to have him gone.....I hang my head in prayer for him....Dave

BUMP BUMp!!!!

WEEELLLL, A Happy Re-B-day to ya Mr.Z.That means double the cake and ice cream, presents etc.

It's the Oooonly way to go. Enjoy the kids while ya can . The older ya get ,weelllll so do the kids..

Just funnin,Congrats..Dave

Sorry to hear about your woes ,accept my prayers too, things will work out,just gotta have faith....Dave

Hey folks, just called to say I've been busy this week end. Was reshaping some 308s to 8mm308. The decided

to cast some bullets for a good friend..I made him 200rds of 165gr 8mmrds,then cast 265+ of 175 gr 30-30 rds.

Had a good time,very relaxing..Done some brass swapping with Sailormilan 2. A really nice guy. Can't wait till

our next encounter and hit the range here...Here is a pic of the bullets.....Dave

you talking about those little black w/ grey stripped things If you are then yes those are low current high voltage probly around 200volt and 1.5 amperers..you can get them at radio shack..they are'nt expencive at all.

Did I miss something? Did'nt know it was yer B-day Mr.Z,Best wishes and have a happy one....Dave

So Dave, That's whatcha look like ...Boys look good..Shawn looks good.Heck it's all good. Don't see no pics of guns

on this trip huh??

Check with midway,that's where I got mine. just there==$59.99 for RCBS

8mm-06--part # 519985...Hope this helps...BTW RCBS were the cheapest for a fz die set.....Dave

Anyone want it for free???

Holy Toledo dude!!! That's an awsome looker!!! When ya think you will test fire it? Did ya make that bench rest,looks functional.. Do ya need any brass for yer 300 mag. I got more than I need!!If ya want some ,pm or email me. That is nice...Dave