machinist1 Posted March 11, 2011 Report Share Posted March 11, 2011 Hey guys, Which one of the new reloading manuals has the most data for the 9.3x62 Mauser? None of my manuals list this cartridge. I,m interested in safe loads for a M649 Husqvarna, which is based off of the model 96 Mauser. What are some of your favorite powders? I purchased some 250 Gr. Nosler Accubond bullets. I would like to keep velocitys in the 2200-2300 FPS range. Thanks, Bob Quote Link to comment Share on other sites More sharing options...
Sailormilan2 Posted March 11, 2011 Report Share Posted March 11, 2011 Try here: http://reloadersnest.com/frontpage.asp?CaliberID=145 http://data.hodgdon.com/cartridge_load.asp Quote Link to comment Share on other sites More sharing options...
Brenden Posted March 15, 2011 Report Share Posted March 15, 2011 Straight out of the Nosler manual (#6) 250 grain AccuBond Varget (most accurate) Starting charge- 52.5 2383 FPS Ending charge- 56.5 2525 IMR 4064 Starting charge- 52.0 2341 FPS Ending charge- 56.0 2582 IMR 4320 Starting charge- 55.5 2415 FPS Ending charge- 59.5 2569 I accept no responsibility for error in this data or error to note maximum loading charges. (save my own a$$, sorry) May want to start lower for the huskey. These loads were for modern firearms. Sounds like the starting loads would be ok though, close to your desired range. Brenden Quote Link to comment Share on other sites More sharing options...
machinist1 Posted March 15, 2011 Author Report Share Posted March 15, 2011 Thanks guys. Are there aany more manuals that list the 9.3x62? I need to update anyway. Bob Quote Link to comment Share on other sites More sharing options...
Brenden Posted March 18, 2011 Report Share Posted March 18, 2011 The new Hornady book may. They started making 9.3's a while back as you most likely know. May try Barnes too. I don't have a new Hornady book yet, but I will let you know what’s in there when I get mine. Brenden Quote Link to comment Share on other sites More sharing options...
Spiris Posted March 18, 2011 Report Share Posted March 18, 2011 Here's data from Nosler's load site using the 250gr Accubond. http://www.nosler.com/Reloading-Data/9.3x62mm-Mauser-250-Grains.aspx You'll note that Nosler seems to favor faster burning powders in the 9.3x62. IMO, the data available at manufacturer's/distributor's online load site are the newest, up to date information available, and I use the printed manuals for reference only as a cross check. Spiris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.