ken98k Posted February 14, 2009 Report Share Posted February 14, 2009 I needed an accurate way to measur downfeed on my mill so this is what I came up with. Works great. Link to comment Share on other sites More sharing options...
Ron J Posted February 15, 2009 Report Share Posted February 15, 2009 No reason why it shouldn't. Good deal. Link to comment Share on other sites More sharing options...
donmarkey Posted February 15, 2009 Report Share Posted February 15, 2009 Same set up I use on the tailstock of my lathe, works great. Don Link to comment Share on other sites More sharing options...
Clark Posted February 24, 2009 Report Share Posted February 24, 2009 I milled out a mighty mag base so it would fit a dial indicator for measuring chamber reaming depth from the tail stock. Someone pointed out that all I needed to do was take the back off the dial indicator and turn it 90 degrees. Link to comment Share on other sites More sharing options...
ken98k Posted February 24, 2009 Author Report Share Posted February 24, 2009 I'm thinking about up-grading to this- http://www.grizzly.com/products/h8133 Link to comment Share on other sites More sharing options...
Recommended Posts