The coyote

thank you.do you have to reheat the bolt to do this. and dose ruger clip work how thanks the coyote

want to know how make 222 or 223 feed and extract . allso bolt face it is bigger what to do 0n mauser 98

thanks for your help need all i can get.

well i sent for a reamer and go gauge. need any info on reloading .224 x 6mm

if we tig it the heat wont bring to 650 thats wy isay go slow around lug and bolt the holes dont look llike their that close i have saved some actions but allways be safe

this looks bad we could make it right we can tig it up go slow

The chop saw is ready. What length do I want it? What do I do about the bolt face- weld it up and cut? I will start as soon as I can.

THANK YOU ZIR FOR HELPING ME JUST WANT TO BULD ONE OF MY OWN. HAVE F54 ADAMS BARREL 1IN14 224 CAL. I LIKE SMALL CAL BUT ALL MAUSER ARE LONG ACTION SO I AM LOOKING FOR ROUNDS THAT WILL USE SAME LENGTH ROUNDS WITHOUT BURNING MY BARREL DOWN.

i think angle is not right for plunger

need aney info on loading 7x57 or8mm to 224 long or short barrrel life what to 22-50 just want to use mauser cases z1r has ben thire thank you

thank you cant type good am trying so we could get on same page i just want to use 224 55g on 7x57 or 8mm thank you z1r

bill thank you would like to see it sounds good

Where do i find it what you are saying 5.6 x57 who makes it?

I found some dies i think can't find reamer or any loading data for 55 gr. Will this burn my barrel down? I want to use Mauser brass 7x57 or 8mm.

is this a kit or did you make it

thank you for info

Has anyone done 7X57 or 8MM Mauser necked down to 22? If so any information would be appreciated on those rounds. Sure would like to solve feeding problems.

Thank you I'll do as you say.

It far exceeds my skills. I have 223 wsm willing to share with anybody willing to help me with a 22-08. Can you tell me where to get a reamer and headspace gauge like that? My reamer is pt&g solid pilot brand new. Any information on this cartridge would be helpful.

Its a good thought but I want to feed cartridges. Need to feed cartridges.

Because I don't like recoil because of injurys I've had. I'm trying to find something without a bunch of recoil and be a hell of a varment gun that will work in a mauser. Could you tell me more about the cartridges you mentioned? Or any other ideas you have? Thanks. Thank you I am looking for something short light and fast without much recoil that will work with my mauser. Thanks.

Does anyone out there know how to open up feed rails on model 98 Mauser to accept and feed 223 wsm?