dirtyjim Posted November 16, 2007 Report Share Posted November 16, 2007 i picked up a yugo captured mod98 in poor shape from a gb auction. at least the bore was good. i had a share freischutz classic stock from great americans bargain bin & thought i'd drop in it along with one of my sculptured triggerguards for a quickie sporter build. when i started inletting it to the stock the rear sight looked to big so i shortened it to only read 600 yards & i've reashaped the front sight to resemble a banded front sight. i still have to rework the spring for the rear sight so it will work correctly. how i got it inletted into the stock shortened rear sight, before the step on the barel was turned back just about finished, still need to mount the front sight, fix a few screwups & wetsand the stock sculptured triggerguard i have to fix a small gap where i goofed fitting the buttplate. i'll fill it with sawdust & epoxy Link to comment Share on other sites More sharing options...
sonic1 Posted November 16, 2007 Report Share Posted November 16, 2007 been wanting to get one of those stocks ..i love that old world look Link to comment Share on other sites More sharing options...
eric123 Posted November 16, 2007 Report Share Posted November 16, 2007 Nice lines on the stock... Link to comment Share on other sites More sharing options...
Polock Posted November 20, 2007 Report Share Posted November 20, 2007 Looks like a "B" sporter, or a very nice guild gun. What really impressed me is the work you did on the rear sight. Beautiful!! Great job on the shortening--it really looks cool. Most would have given in to the easy way: sweat on a Williams or other aft mkt sight. Wish I could do such nice work-- Did you also re-do the front sight?? Would like to see a pic. Bet it really sets of the rifle-- Again, congrats on a beautiful job-- Polock Link to comment Share on other sites More sharing options...
dirtyjim Posted February 9, 2008 Author Report Share Posted February 9, 2008 i've done a little more to the rear sight. i reshaped the front of the sight base by adding a small section from a piece of pipe. i still need to fill in a few pits & cut the ears down a little. i added the rear part from a krag 1898 sight to a mauser sight leaf to make it windage adjustable & they have a neat little fold up peep on the back of the sight. its soldered on right now, i'll have it tig welded when i have another bolt done. the krag sight was already cut in half when i got it & i just sold a complete 1898 krag sight for $75 so i wouldn't advise cutting up a good one. i need to rework another ramp & spring because the first one i did doesn't work right but i can see what needs to be changed on the next one. i'm still working on the front sight but i don't think its going to work out so i'll probably use a banded front sight instead. Link to comment Share on other sites More sharing options...
Brenden Posted February 10, 2008 Report Share Posted February 10, 2008 astounding work. I really like that stock and rear sight. Very nice work Brenden Link to comment Share on other sites More sharing options...
GA1dad Posted February 10, 2008 Report Share Posted February 10, 2008 Good Job!! I like the looks of that stock also! Link to comment Share on other sites More sharing options...
donmarkey Posted August 25, 2008 Report Share Posted August 25, 2008 Jim, Is this one complete yet? -Don Link to comment Share on other sites More sharing options...
dirtyjim Posted August 29, 2008 Author Report Share Posted August 29, 2008 don, as soon as i put the front sight on it will be finished. the reworked military front sight just didn't look right & ended up being to low for the rear sight so i ordered a necg banded sight for it, but i didn't have it with me when i had the gun blued. the gun has been rust blued & the stock has about 15 coats of tung oil on it. i also forgot the action screws when i had it blued too. basically it just has a few odds & ends to be done. i'll get that 303 brass in the mail this weekend Link to comment Share on other sites More sharing options...
donmarkey Posted August 30, 2008 Report Share Posted August 30, 2008 Sounds good get some new pics when you get the parts blued. Are you going to locktite the sight on? I'm up and running as of last night finally so I'm ready for the brass. -Don Link to comment Share on other sites More sharing options...
Recommended Posts