CTI Posted February 3, 2009 Report Share Posted February 3, 2009 Anyone got a favorite load for this round using IMR or Hodgden powder? Trying to find a accurate load.. Thanks Quote Link to comment Share on other sites More sharing options...
Kenpo Joe Posted February 24, 2009 Report Share Posted February 24, 2009 Anyone got a favorite load for this round using IMR or Hodgden powder? Trying to find a accurate load.. Thanks Good luck on that. The 3 M95s I have slug out at .330, .331, and .333. I have brass still on order, so I don't have any loads for you. Back on mute. Quote Link to comment Share on other sites More sharing options...
Spiris Posted February 24, 2009 Report Share Posted February 24, 2009 Here's a load from a site that I use. I recommend dropping 4 grains and working up as it is a heavy load. 205gr Hornady IMR-3031 Charge wt. 44.0 Gr. Velocity 2270 FPS Energy 2346 ft. lb. Barrel length 19.0 inch 3.000 OAL This load was developed using Hornady spire-pointed, jacketed, soft-point, flat-based bullets. In terms of power, the developer considers this a heavy load. The velocity measurement is by chronograph. Graf cases and Winchester LR primers were used in development. Spiris Quote Link to comment Share on other sites More sharing options...
CTI Posted February 28, 2009 Author Report Share Posted February 28, 2009 Thanks I'll try it out reduced and work up to were I feel comfortable. I found some more online. Some where using military brass and primers for some of the loads. Thanks for the input. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.