724wd Posted January 31, 2010 Report Share Posted January 31, 2010 hey guys, i have a small project i'd like done, but don't have access to a lathe. thought maybe one of you guys could use a couple extra bucks to help a guy out... i'm trying to put together an archery stabilizer and need two aluminum plugs machined and threaded. pieces will be 1.25 inches OD, stepped down to 1.2, one threaded 1/4-20, the other 5/16-24, interior bored .35 and tapped 10-24. i have a detailed drawing showing all the steps, holes and such. i can provide the aluminum and pay for your time and tools machining, or if you have access to this type of stock, i can pay for time/tools/material. PM me or post here... either way! if you can help, i'd really appreciate it! heath (psst... stop staring at my avatar!) Quote Link to comment Share on other sites More sharing options...
724wd Posted January 31, 2010 Author Report Share Posted January 31, 2010 rod, here is the schematic... 1/4-20 and 5/16-24 holes are .75 deep, tapped with bottoming tap. 10-24 holes are .5 deep (counting the counter bore). does any of this make sense? Quote Link to comment Share on other sites More sharing options...
724wd Posted February 2, 2010 Author Report Share Posted February 2, 2010 did i scare you off rod? Quote Link to comment Share on other sites More sharing options...
hodgie Posted February 7, 2010 Report Share Posted February 7, 2010 did you get these made yet? if not, let me see what i have for stock. 6061 ok? i believe that all we have. Quote Link to comment Share on other sites More sharing options...
724wd Posted February 8, 2010 Author Report Share Posted February 8, 2010 thanks friend. i had a chunk of 7075 shipped to tanglewood. if for some unlikely reason rod decides he can't do it, i'll let you know. Quote Link to comment Share on other sites More sharing options...
724wd Posted March 17, 2010 Author Report Share Posted March 17, 2010 thanks rod! she's a shooter! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.