karlunity Posted February 3, 2012 Report Share Posted February 3, 2012 Fellas. I was trying to install a linksys wireless -G 2.4 pci adap card and for some reason it disables my monitor. once I remove it the monitor comes back on line .looked on google..no-joy...any Ideas? karl Quote Link to comment Share on other sites More sharing options...
Dr.Hess Posted February 3, 2012 Report Share Posted February 3, 2012 Sounds like an interrupt conflict or an address conflict. See if you can change the linksys address or interrupt with jumpers on the card. You might also be able to change the settings in the driver, but I dunno. Last choice, try calling linksys for help. These things aren't supposed to happen with all the new plug and pray stuff. Quote Link to comment Share on other sites More sharing options...
8uck5nort Posted February 3, 2012 Report Share Posted February 3, 2012 Ditto to what Dr. Hess said. You might try moving the pci card to a different pci slot if you have on available and try again. Is the video adapter an older pci archetecture? Or is it AGP or one of the newer PCIx flavors? Built in to the motheboard? Quote Link to comment Share on other sites More sharing options...
FC Posted February 3, 2012 Report Share Posted February 3, 2012 A wireless G is an older model. I had problems in the past with the same brand, wireless-G. The N are newer, and easier to set up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.