sonic1

i was there in april ..biggest show i've ever seen .planning on making it again

i've modified a nagant bolt by machining a ring to fit in the face ..then use 350 deg. solder to weld it in place..then openup the bottom feed lip of the bolt... this was for a 30-30 project i was working on....

.270 rem. barrel would run about $30.00 to $40.00 off fleabay trim it down to fit the turk would be by far the best way to go..

from another site but good reading for those who have not seen it....... Major Victory For Firearms Owners And Freedom In Louisiana Friday, September 23, 2005 (Fairfax, VA) -- The United States District Court for the Eastern District in Louisiana today sided with the National Rifle Association (NRA) and issued a restraining order to bar further gun confiscations from peaceable and law-abiding victims of Hurricane Katrina in New Orleans. “This is a significant victory for freedom and for the victims of Hurricane Katrina. The court’s ruling is instant relief for the victims who now have an effective means of defending themselves from the robbers and rapists that seek to further exploit the remnants of their shattered lives,” said NRA Executive Vice President Wayne LaPierre. Joining LaPierre in hailing the U.S. District Court decision was NRA chief lobbyist Chris W. Cox. “This is an important victory. But the battle is not over. The NRA will remedy state emergency statutes in all 50 states, if needed, to ensure that this injustice does not happen again." The controversy erupted when The New York Times reported, the New Orleans superintendent of police directed that no civilians in New Orleans will be allowed to have guns and that “only law enforcement are allowed to have weapons.” ABC News quoted New Orleans’ deputy police chief, saying, “No one will be able to be armed. We are going to take all the weapons.” The NRA also pledged that it will continue its work to ensure that every single firearm arbitrarily and unlawfully seized under this directive is returned to the rightful law-abiding owner.

apply for a C AND R ffl just cost $30.00 for 3 years then have them delieverd to the front door.SOG has turk for $60.00 each delieverd if you buy 5.. just a thought ...

yes in the cal. you listed a different reamer is needed....

thanks after 4 hour on line reading up on bore and groove for .45 i see a wide range of sizes..looks like twist rate is the biggest factor that changes..

www.rhinelandarms.com these guys sell the stuff so you can build your own..i would like a barrel a little longer but they say this is the only one they sell.. what bore and groove does a .45acp use???? numrich has some barrel blanks but they may be for a .45long colt..

yes i saw that...looks neat rhineland arms making them to.. after looking at .405 it s to long at 3.18 overall

thanks had not thought of that one .. "A government that is big enough to give you everything you want is strong enough to take away everything you own." Thomas Jefferson

i have came across a couple of ruff mark#4 i need some ideals for dfferant cal. that will work on them ..i see some going 7.62x54 ..will a .444 marlin work.? changing barrels are not a problem.. just looking for something that feeds will and within pressure range..

boyds inletting is not any good at all...it may be better on a special order but i just got a mark #4 enfied stock thats got 1/4" gaps around one side on trigger guard.

scary thing when the gov. take your gun and tells you to get on the truck WE know whats best for you!!!!!

e-mail sporter express i'm sure they have more info an them. info@sporterexpress.com

the .243 is a much better round for a mauser .feeds much easyer

mexico has said it will send a million men to aid in cleanup.. only thing is they want leave

heres one i"m working on http://www.villagephotos.com/pubbrowse.asp?folder_id=1437380

oilfields i think you hit the nail on the head there THIS is all about oil.... the ISLAMIC world could care less about the U.S. .....what they don"t like is our policy in the middel east. our troops on there soil ..to make sure the oil keeps flowing.....if they had no oil we would treat them just like AFRICA .. as CHINA become a major oil buyer look out boys and girls there lining up with the arabs to make sure THERE oil keeps flowing.. no windfall profit tax on the oil companys this time... we got oil boys in the whitehouse now..the only energy they can think of is pumped from the ground.. CHINA is 15 to 20 years away from being the next world power..every country has its turn,,theres is coming up and theres little we can do to stop it..more and more troops around oil field will not stop them.. a sain energy policy is the best way to stop fighting the world for oil.. now i support the troops there doing as ordered .. the writer says we need to PROTECT OUR WAY OF LIFE "that means protect our oil" because that is our way of life. OK MY RANT IS OVER

still think tring differant bolt might be your best bet..setting the barrel back would cost almost what the turk will cost. do;nt know of anyone close to you...if you add cost of shipping you will have to much in the turk unless its a very special rifle.

We are like shop windows in which we are continually arranging, concealing or illuminating the supposed qualities others ascribe to us - in order to deceive ourselves. -Nietzsche.

some but not all of that launcher will screw off..left hand threads i beleive...? i have cut some off about 1/2 passed the front sight and recrowned.. some places are modifing the launcher to make it legal for those states.. i guess AIM does'nt know they can't modify aC&R and still sell it as a C&R been meaning to inform them of that..............

guess he's scared of being sued ,,,using that logic he must weld up every thing he machines so no one will sue...be glad he don't want to drill holes in it.. learn to do it your self..

maybe not perfect but usable in terms of lenght and price .the .303 is so close in shape that some say you can shorten chamber to get the 7.62x39 to fit with out a reamer..

this was one of the cheap romanian ak parts kit you see for sale everywere. bought the dragunov wood.bent the receiver from a flat.. got a barrel from NUMRICH .also had to make a longer gas rod..the reamer group has the 7.62x39 reamer...still need to mount the scope.. in all have about $200.00 in it

homemade dragunov used .303 enfield barrel My Webpage