ghost95 Posted March 8, 2013 Report Share Posted March 8, 2013 Hello all, I have a question I hope you can help me with.I have a wheeler action wrench, the one with the v cut in the head and 2 bolts that secure it to the handle. What I was wondering if I could use a Brownells action wrench head on the Wheeler handle. anybody know if they are interchangable?Thanks, C- Quote Link to comment Share on other sites More sharing options...
donmarkey Posted March 11, 2013 Report Share Posted March 11, 2013 Don't know but I do know the dimensions of the brownells ones are on the site. Of I can measure the one I made, I know I used the dimensions from brownells so I could use there heads if I needed an odd one or hard to machine one. Don Quote Link to comment Share on other sites More sharing options...
ghost95 Posted March 12, 2013 Author Report Share Posted March 12, 2013 Thanks, I looked there but must have missed them. I'll check again. I was mainly concerned about the hole spacing. Quote Link to comment Share on other sites More sharing options...
Clemson Posted March 12, 2013 Report Share Posted March 12, 2013 Brownells hole spacing appears to be about 3.250" Quote Link to comment Share on other sites More sharing options...
ghost95 Posted March 12, 2013 Author Report Share Posted March 12, 2013 Thanks, when I get home Ill measure the Wheeler handle I have to see if the Brownell's heads will fit. Thanks again. C- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.