brian923 Posted July 19, 2007 Report Share Posted July 19, 2007 i was just wanting to know if it were a yeah!! or a nayh!! on the advanced technology stock. any likes? dislikes? i couldnt figure out how to post the picture but it can be found at this site: http://www.tjgeneralstore.com/advanced_tec...ifle_stocks.htm then scroll down about 1/3 the page. thanks guys, brian Quote Link to comment Share on other sites More sharing options...
ken98k Posted July 19, 2007 Report Share Posted July 19, 2007 They're okay if you like that style. Will work on standard or intermeadate length actions. Must be a "bent bolt" action. Won't work on k-kales unless you machine off the ring at the front of the receiver. Quote Link to comment Share on other sites More sharing options...
roscoedoh Posted July 19, 2007 Report Share Posted July 19, 2007 FMSniper has used several of them and gotten good results. I've always thought they looked like a little cheap, but that's just my opinion. -Jason Quote Link to comment Share on other sites More sharing options...
z1r Posted July 19, 2007 Report Share Posted July 19, 2007 I've always thought they looked a little fugly! But, as Jason says, FM has had good results. Beauty is in the eye of the beholder. Quote Link to comment Share on other sites More sharing options...
tinkerfive Posted July 19, 2007 Report Share Posted July 19, 2007 I see that they have an option without the scope rail. I recall that some thought that their scope rail was either too high or not solid enough. Those folks were mounting their scopes normally and tossing the scope rail before AT had a no scope rail option. Personally I kind-of like the look. I have never shot a gun in one of those stocks, I assume that the ergonomics are good. Tinker Quote Link to comment Share on other sites More sharing options...
bert01 Posted July 19, 2007 Report Share Posted July 19, 2007 in my experience the integrated scope mount is useless but ergronomics are ok for a less exspensive tac style stock Quote Link to comment Share on other sites More sharing options...
AzRednek Posted July 19, 2007 Report Share Posted July 19, 2007 i was just wanting to know if it were a yeah!! or a nayh!! I say yeah. If you like it, that is all that matters. I'm assuming it is the SKS folder stock you're looking at. I've never owned one but did handle one at a gunshow. It felt a little top heavy to me. Quote Link to comment Share on other sites More sharing options...
sandyridge1123 Posted July 19, 2007 Report Share Posted July 19, 2007 I used one on a mauser 98 and it was a piece of junk. 5" groups at 100 yds. switched to a cole lite stock and groups dropped to 1.5" at 100yds. My 2 cts they are not worth the money. Quote Link to comment Share on other sites More sharing options...
cold shot Posted July 20, 2007 Report Share Posted July 20, 2007 I used one on a mauser 98 and it was a piece of junk. 5" groups at 100 yds. switched to a cole lite stock and groups dropped to 1.5" at 100yds. My 2 cts they are not worth the money. Ditto on the m98 stock. I had one an trying to bore site it was next to impossible. Gave it away, modified a mil stock, Mucho better. Just my .07's worth. Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.