z1r Posted March 8, 2008 Report Share Posted March 8, 2008 Some one suggested we start a thread about everyone's own favorite handle style so here it is. Post pics of your favorites and tell us why. I'll hold off on pics for now but will say I prefer welded because of the variety you can get. My own thoughts and experiences on the matter are that considering how much most people end up spending on a rifle they cheap out on parts that they later regret not having spent the money on to get what they really wanted in the first place. My least favorit welded handle is the Brownells dog leg style. However, I get a lot of requests for that style. Whenever I post pic of this handle I get ten requests the following month. Link to comment Share on other sites More sharing options...
gun nutty Posted March 8, 2008 Report Share Posted March 8, 2008 And of course, you post the picture! That's another ten. Link to comment Share on other sites More sharing options...
z1r Posted March 8, 2008 Author Report Share Posted March 8, 2008 And of course, you post the picture! That's another ten. Exactly, lol! Just goes to show that everyone has different tatses. And luckily we can accomodate them all. Oh, that and I need money, lol. Link to comment Share on other sites More sharing options...
Racepres Posted March 8, 2008 Report Share Posted March 8, 2008 First is my fav. weld on style then my fav. forged one Both are scalloped fairly deeply for lower clearance... Just the styles that I prefer... note, some do not like "swept"... I obviously do!! MV Link to comment Share on other sites More sharing options...
donmarkey Posted March 8, 2008 Report Share Posted March 8, 2008 I prefer mine straight down like these. The bottom one doesn't really stick out that far, I just haven't got around to notching the receiver. -Don Link to comment Share on other sites More sharing options...
donmarkey Posted March 8, 2008 Report Share Posted March 8, 2008 Here's another one, of course I still have to finish cleaning up the weld. -Don Link to comment Share on other sites More sharing options...
AzRednek Posted March 8, 2008 Report Share Posted March 8, 2008 I don't have a picture handy but I like the butter knife style. Used to be real popular in 1950 and 60's sporters, especially on Mannilichers. I have a picture buried somewhere in my picture files, if I can find it I'll post it. Link to comment Share on other sites More sharing options...
724wd Posted March 9, 2008 Report Share Posted March 9, 2008 what i lust for... Link to comment Share on other sites More sharing options...
montea6b Posted March 9, 2008 Report Share Posted March 9, 2008 I'm kinda partial to this one. Look familiar? Link to comment Share on other sites More sharing options...
roscoedoh Posted March 10, 2008 Report Share Posted March 10, 2008 Here's a forged bolt that Mike cleaned up a bit when he put my 8x60s together. He didn't forge it; I had that done previously. He did have to address a couple areas with a file to make it 100% though. My next bolt handle with a be a TIG'd on straight handle. Either from Half Moon Gunshop or Talley. Link to comment Share on other sites More sharing options...
ken98k Posted March 10, 2008 Report Share Posted March 10, 2008 Here's a forged bolt that Mike cleaned up a bit when he put my 8x60s together. He didn't forge it; I had that done previously. He did have to address a couple areas with a file to make it 100% though. My next bolt handle with a be a TIG'd on straight handle. Either from Half Moon Gunshop or Talley. Looks real good! Z's working on one for me, can't wait to see it. Link to comment Share on other sites More sharing options...
lemski4 Posted March 11, 2008 Report Share Posted March 11, 2008 Kind of a personal thing but what i like on my rifles. Link to comment Share on other sites More sharing options...
z1r Posted March 11, 2008 Author Report Share Posted March 11, 2008 Kind of a personal thing but what i like on my rifles. As far as I'm concerned there is no right or wrong, just personal preference. Well, unless the handle falls off. Don't laugh, I've seen it. Link to comment Share on other sites More sharing options...
AzRednek Posted March 11, 2008 Report Share Posted March 11, 2008 As far as I'm concerned there is no right or wrong, just personal preference. Well, unless the handle falls off. Don't laugh, I've seen it. I didn't see it but a co-worker had his bolt handle come loose on his near new Remington 700. He claimed Remington ate it as it had to ago to a smith with a live round in the chamber. When he picked it up he was told no charge Remington took care of it. Link to comment Share on other sites More sharing options...
z1r Posted March 11, 2008 Author Report Share Posted March 11, 2008 Tanglewood, I have that one's ugly sister. Link to comment Share on other sites More sharing options...
Limpid Lizard Posted March 11, 2008 Report Share Posted March 11, 2008 I can feel the love. LL Link to comment Share on other sites More sharing options...
cold shot Posted March 11, 2008 Report Share Posted March 11, 2008 Tanglewood, I have that one's ugly sister. z1r ya might have its sister,but I swear I got its mom and pop too. I wasn't the one that done em though!!! Link to comment Share on other sites More sharing options...
Uncle Grinch Posted March 12, 2008 Report Share Posted March 12, 2008 I have always understood a forged bolt (on a military action) is one that has been heated, cut, bent and rewelded. They all end up fairly short and stubby. Some of the photos I am seeing here don't look like forged bolts to me, but look more like welded on bolts. Maybe it's a matter of symantics, ie... forged vs. cast handles that are weled on or military bolts that have been forged into a new shape. Are we all talking the same? Keep me straight please. Link to comment Share on other sites More sharing options...
Racepres Posted March 12, 2008 Report Share Posted March 12, 2008 U.G. I have personally never been exposed to a forged handle that was also welded... But I may be inexperienced... While some believe that there is only "one way"... I believe that it is more a matter of "who done it" than the "way"!!! And this thread proves that we certainly don't all like the same "gal" !!! For me... price vs result = works just fine... But, I aint buildin' heirlooms...I'm content w/ simply works!!! MV Link to comment Share on other sites More sharing options...
z1r Posted March 12, 2008 Author Report Share Posted March 12, 2008 All the pics up until Roscoe's are of welded on handles. The old handle is cut off, and a new, much better looking one (lol) is welded on. Roscoe's was forged. The job was a good one and the handle looked good but we did encounter problems where the bolt root (square stub at the base of the handle) was displaced fore and aft. The result is that the bolt rubbed on the receiver at the front and the shroud rubbed on the bolt root at the rear. I had to remove material and while at it offered to "improve" the lines. Jason and I liked the result, at least I think he did. The bolt tanglewood posted is truely a forged bolt job where the handle was heated red hot and whacked with a suitable heavy object in order to bend it. If yer cutting and welding then it's a welded job as far as I am concerned. My bias against forged handles stems from the fact that most are poorly done. Thye tend to displace metal into areas you don't want, and the handles are too short especially for scope use. You end up banging your knuckles into the objective if you use a scope. This of course is not true of all forged handles but certainly most of the ones I've seen in person. I find that welding offers up more choices. But if a forged handle suits one's needs there is nothing wrong with it. believe me, I've seen my share of botched weld jobs too. You can get a short stubby handle by either welding or forging. Link to comment Share on other sites More sharing options...
bubbamauser Posted March 12, 2008 Report Share Posted March 12, 2008 Here goes my favorite, the second bolt I welded. done with a cheap harbor freight stick welder . Link to comment Share on other sites More sharing options...
z1r Posted March 12, 2008 Author Report Share Posted March 12, 2008 I applaud anyone that can stick weld a bolt handle on. I used to stick weld pretty good in high school but I have a hard enough time with my fancy schmantzy tig welder. Link to comment Share on other sites More sharing options...
bubbamauser Posted March 12, 2008 Report Share Posted March 12, 2008 this does come down to individual taste because I love the second one Tanglewood Z, I don't know if that was due to welding ability or being hard headed I spent 10 times as much time grinding and polishing as welding. It was just what I had to use at the time. after using Mig I don't think I would Arc one again when I get Tig I'll probably say the same thing about mig. Roy Link to comment Share on other sites More sharing options...
Racepres Posted March 12, 2008 Report Share Posted March 12, 2008 All the pics up until Roscoe's are of welded on handles. The old handle is cut off, and a new, much better looking one (lol) is welded on. not quite... but I am not adept at picture posting... the one I say is forged is in fact, w/o being touched up!! BTW the welded one I like is not perfect... but close enough for the girls I go with!!! MV Link to comment Share on other sites More sharing options...
Racepres Posted March 12, 2008 Report Share Posted March 12, 2008 OOOhhhh that second one gets me!!!! Somebody said something abt the ole butterknife!!!! I just love the darn thing!!! Great job there Tanglewood!!!!! MV Link to comment Share on other sites More sharing options...
Recommended Posts